Ron Paul Designs creator has new design for 2012 brand with eagle symbolism!

[justinpagewood]

Hey Justin, this is great advice.

I'll play around with this in Illustrator. I agree it could use a couple-degree tilt up.

 

[sailingaway]

I figured out why I wasn't drawn to the blue....

This is an environmental agency in CA that has essentially run all industry out of the state, single handed, imho.

Be that as it may, I have a blue sticker in my cart right now along with a black one, and was waiting to see if the white and gray one was coming. How exactly would the chip in work? I'd get a pin or pins now and stickers. I'm kind of waiting on the shirt to see where you end up, because the last shirt I got off zazzle was kind of thin and if there are heavier cloth options I'd prefer that, but otherwise these would be ok. They don't quite work though if you change colors, but since I'm waiting to see where your shirts end up, that isn't my immediate issue. If I had my way, I'd get the white and grey bumper sticker, the blue bumper sticker, the black bumper sticker and a red bumper sticker. Was there a red one? And a few of the pins. I'm not personally drawn to the other stickers, but maybe I'm just not imagining their use properly.

I'm not sure how the chip in thing would work....?

 

[justinpagewood]

That's not in the store.....

Cool. It's now at the store: http://www.zazzle.com/grey_bumper_sticker-128907120863262870

 

[sailingaway]

Thanks. I got 3 bumper stickers and 3 buttons for now. If you get a red bumpersticker I'll probably get that too....

 

[justinpagewood]

Thanks. I got 3 bumper stickers and 3 buttons for now. If you get a red bumpersticker I'll probably get that too....

Got a Red one up: http://www.zazzle.com/red_bumper_sticker-128682023190720382

 

[sailingaway]

Got a Red one up: http://www.zazzle.com/red_bumper_sticker-128682023190720382

Oh, wow, that's nice. Bought two.

 

[justinpagewood]

Hey everyone:

Came up with a minor dilemma.

Bumper Stickers may be more expensive if we do quality weather-resistant vinyl, the cost would be about $2 per bumper sticker. But it'll be worth the cost so that it continually looks good on your car. Either way, should work out.

 

[justinpagewood]

Oh, wow, that's nice. Bought two.

You should put the grey and red ones on your store page. they aren't there. I was going to copy the red one to put here so people could see it.

For sure, it takes about 1 hour for it to show on the Zazzle store. Don't know why they do that .

 

[sailingaway]

Hey everyone:

Came up with a minor dilemma.

Bumper Stickers may be more expensive if we do quality weather-resistant vinyl, the cost would be about $2 per bumper sticker. But it'll be worth the cost so that it continually looks good on your car. Either way, should work out.

I'd say go with better quality, unless we do a mass one just to hand out at an event or something.

In fact, that is something to consider. What do people think of doing a chip in to get a bunch of these and hand them out outside the SC May 5 Debate? We'd have to get them to an RPF'r who's going... And for those we might do the cheaper ones since a bunch probably won't even end up on cars...

If we got 1000 could we get a better price? Or is that as low as it goes? Because if we do a chip in we'll be wanting to get a slew of them....

I'm not saying they aren't well priced, I'm just trying to see what we could get for how much money to see if a chip in for that works. I know we can get 1000 flyers for less, and we may prefer more copies to bumper stickers, for that event. However, the bumper sticker might get media if we use them. They aren't big like the R3VOLution banners, but people could give them to media....

 

[ForLibertyFight]

I'd say go with better quality, unless we do a mass one just to hand out at an event or something.

In fact, that is something to consider. What do people think of doing a chip in to get a bunch of these and hand them out outside the SC May 5 Debate? We'd have to get them to an RPF'r who's going... And for those we might do the cheaper ones since a bunch probably won't even end up on cars...

If we got 1000 could we get a better price? Or is that as low as it goes? Because if we do a chip in we'll be wanting to get a slew of them....

I would support this.

 

[Zack]

Just want to say I love the design and I'm against the tilt-up idea. At least not anywhere near the 7-ish degree tilt up in that example, which actually made the far wing raise as high as the near wing. A subtle 1 or 2 degrees, i dunno, sure maybe.

 

[sailingaway]

Just want to say I love the design and I'm against the tilt-up idea. At least not anywhere near the 7-ish degree tilt up in that example, which actually made the far wing raise as high as the near wing. A subtle 1 or 2 degrees, i dunno, sure maybe.

One reason I bought the bumperstickers so fast was I wasn't sure I'd like them as much tilted up.

 

[Shane Harris]

Just want to say I love the design and I'm against the tilt-up idea. At least not anywhere near the 7-ish degree tilt up in that example, which actually made the far wing raise as high as the near wing. A subtle 1 or 2 degrees, i dunno, sure maybe.

agreed

 

[QueenB4Liberty]

I like it a lot! I like the shirts as well!

 

[justinpagewood]

agreed

Ya, I will test it out and see. I think if anything just 1 or 2 degress would be max.

 

[justinpagewood]

So here is the Eagle titled up about 5 degrees. What do you guys think?

 

[SimpleName]

Perfection. Simple and beautiful. We definitely need to role with this design scheme.

 

[Aldanga]

I like it.

 

[Austin]

Regarding bumper sticker placement.. Research has shown that the best place to stick it is on the front of the vehicle, driver's side.

 

[Fr3shjive]

I suggest making some tank tops with this design. Im a young person and Im sure they'd catch on with the youth of the RP movement.