Whoopie Goldberg's Glock

Joined
Aug 31, 2007
Messages
117,543
H/T [MENTION=849]jmdrake[/MENTION]

[1] I say "Whoppie Goldberg Glock" because that moron once tried to argue with Rand Paul on The View that "automatic" weapons were being used in these school shootings but that her Glock was okay to own, not knowing that a Glock is a semi automatic just like an AR15, and it's just as easy to turn a Glock to full auto as an AR 15.



Outrageous video shows Chicago men firing machine guns at a crowd, killing a boy and injuring at least 3 adults

https://cwbchicago.com/2023/06/outr...iring-machine-guns-one-dead-more-injured.html

June 4, 2023 8:20 AM CWB Chicago Citywide

CHICAGO — A newly acquired video shows four people, at least two armed with machine guns, unleashing a torrent of gunfire in Chicago on Wednesday evening. The shots left a 14-year-old boy dead and at least three others injured.

Later, a 16-year-old boy fired a gun at Chicago police officers as they investigated the shooting. He was charged yesterday with six counts of attempted murder of peace officers.

The video, provided to CWBChicago by a source, shows four people walking across a vacant lot in the 4200 block of South Wells around 8:20 p.m. on June 1.

As they near the Wells Street side of the lot, a minivan rolls down the street. They duck behind a shrub, then rush onto the sidewalk and begin firing up Wells Street at a crowd standing off-screen.

According to the video, which does not show anyone being injured, at least two of the gunmen’s weapons fired automatically, machine gun-style. The other two offenders also fired shots up the street.

https://twitter.com/i/status/1665064161380794369



Prosecutors charged the 16-year-old with six counts of attempted first-degree murder of peace officers, three counts of aggravated discharge of a firearm toward a vehicle occupied by peace officers, three counts of aggravated discharge of a firearm toward an occupied vehicle, and unlawful use of a weapon by a person under 21, according to CPD.

No other information is available about the boy or the specifics of the state’s allegations against him because he was charged in juvenile court.

COPA, the Chicago Office of Police Accountability, is investigating the officers’ use of force. Under the city’s policy, all officers who fired shots will work administrative duties for 30 days.

The offenders whose guns generated automatic fire were likely using handguns equipped with “Glock switches,” illegal after-market devices that enable semi-automatic pistols to fire more than one round with a single trigger pull. The devices are prohibited under state and federal laws.

Gunmen with switch-enabled weapons often equip their handguns with extended magazines, including drum magazines capable of holding 50 rounds.

This YouTube video shows a federal agent firing a switch-equipped handgun on a shooting range:

 
Last edited:
At least these enterprising young men are helping to bring automatic weapons into the Supreme Court's definition of "common use" :cool:
 
The turd burglar agenda has them thinking that a 3rd hole is for a butt plug.
 
Since "Ukraine" rocket launchers have been showing up in Mexico and full autos showing up in American cities, it kind of makes ya wonder where all of "Ukraine's" weapons are really going....

(reminded of Fast N Furious Eric Holder and cartel weapons...)
 
Last edited:
  • Like
Reactions: RJB
[MENTION=3169]Anti Federalist[/MENTION], I'm keenly aware of the Glock switch issue because it's raised eyebrows in my current home state. Confiscations of Glock switches are up 1200%. And even though there are already federally illegal and Alabama is politically a very pro gun state, there is a serious push to ban them at the state level as well.

The problem is that they are very easy to 3D print. This is much less daunting than trying to 3D print a complete AR 15 or even just an AR 15 lower.

0e098bd8-b709-43a7-892c-ee231548401b-IMG_7490_photo.jpg


cbb70c67-add1-438a-9965-e0e15a504a15-IMG_7492_photo.jpg


Heck, I bet it's possible to make one with a Dremel and a cast block of aluminum (easy to cast aluminum at home) and possibly even a block of hardwood. So the only way to stop this would be to ban Whoopie's precious Glock.

Here's a nutty idea. Say if someone made a Glock switch out of Jello and froze it with liquid nitrogen for a one use Glock switch you could eat after it melted? Okay, I admit that's "magic mushroom" inspired.
 
[MENTION=3169]Anti Federalist[/MENTION], I'm keenly aware of the Glock switch issue because it's raised eyebrows in my current home state. Confiscations of Glock switches are up 1200%. And even though there are already federally illegal and Alabama is politically a very pro gun state, there is a serious push to ban them at the state level as well.

The problem is that they are very easy to 3D print. This is much less daunting than trying to 3D print a complete AR 15 or even just an AR 15 lower.

Heck, I bet it's possible to make one with a Dremel and a cast block of aluminum (easy to cast aluminum at home) and possibly even a block of hardwood. So the only way to stop this would be to ban Whoopie's precious Glock.

Here's a nutty idea. Say if someone made a Glock switch out of Jello and froze it with liquid nitrogen for a one use Glock switch you could eat after it melted? Okay, I admit that's "magic mushroom" inspired.
[MENTION=849]jmdrake[/MENTION]

That's the primary reason I have never cared for the Glock design.

The trigger recoil force is an integral part of the method by which the striker is cocked for the next shot.

Combined with a light trigger pull and a trigger safety, it has led to numerous "undesired discharges" while drawing, holstering or "administrative handling" of Glocks.

Here's a couple of examples:







It's that combination of light trigger pull, trigger back force used for energy to assist in cocking the striker and trigger safety that allows the "Glock Switch" device to work.

BTW, all of your ideas would work.
 
[MENTION=849]jmdrake[/MENTION]

That's the primary reason I have never cared for the Glock design.

The trigger recoil force is an integral part of the method by which the striker is cocked for the next shot.

Combined with a light trigger pull and a trigger safety, it has led to numerous "undesired discharges" while drawing, holstering or "administrative handling" of Glocks.

Here's a couple of examples:







It's that combination of light trigger pull, trigger back force used for energy to assist in cocking the striker and trigger safety that allows the "Glock Switch" device to work.

BTW, all of your ideas would work.


Wow! That last one could have been a comedy sketch on SNL or better yet Living Color. "I'm alright. Everybody alright? Guys. Listen to me!"
 
Back
Top