James_Madison_Lives
Member
- Joined
- Apr 11, 2010
- Messages
- 2,958
It is important because for people to wake up and fend off this end-game totalitarian, China style CBDC-social credit score system, they need to understand just HOW murderous and corrupt our government is. 9/11 was an opening gambit to test how gullible we could be. They were not disappointed. Now we are in the end game. The invisible threat (Covid or any other infectious disease) which requires us to have digital global IDs, submit to injections, and control us 24/7.
The billionaire elite has been very busy. They want way fewer of us, and of who remains they want absolute control so they can take the other two-thirds of the pie they don't already own. We will own nothing and we will be happy. Or else.
9/11: How it Was Done, the Science of Demolition
As public awareness grows about the truth about 9/11, it serves to point out that many features of the towers' destruction fit perfectly with standard patterns of demolition. Evidence which at first seems puzzling is in fact consistent with known demolition techniques.
WTC 7 differed from Towers One and Two in that WTC7 was a traditional "bottom-up" implosion. The Twin Towers, on the other hand, exhibited the more unfamiliar pattern of a "banana peel" demolition, which starts at the middle or the top of a building and progresses downward. The below demolition in China shows the pattern of streamers of arcing debris that we see coming from the Twin Towers, as the cutting of supports begins high above ground level and works its way down.
Banana Peel Demolition in China next to Twin Towers
Banana peel demolitions are used for taller, narrower buildings, where there is danger of the building tipping over should the bottom be cut and the rest of the sequence not execute perfectly.
But first, just how does a demolition work? Students of the truth about 9/11 will not be surprised to learn that it is essentially the art and science of causing to happen what cannot happen without careful engineering: all structural supports in a building must be cut at essentially the same time, so that all pieces are falling at free-fall acceleration through thin air. It is a difficult undertaking to remove all supports nearly simultaneously in redundantly engineered modern high-rises, with extensive cross-bracing which transfers load from compromised members to sound ones. Even then, failed demolitions are not uncommon.
In the below images we see the principle support columns in the "core" of WTC 1, an extensively cross-braced steel assembly which served as the backbone of the towers, and held 70% of the weight.
Twin Tower core backbone under construction
One standard technique is the use of "cutter' and "kicker" charges, in which the first set of charges, the cutters, cut the steel beam supports at precisely timed intervals, and the kicker charge "kicks" the cut piece outward. In all the film evidence of the Towers' destruction, straight, cleanly cut pieces of steel beam can be seen spinning outward from the Towers at explosive speeds, across an area at least three times as long as the Towers are wide. Thirty foot, multi-ton pieces of steel beam and perimeter assembly were found nearly three football fields away from the nearest tower, and windows were blown out across the WTC. These startling facts cannot be overstated.
Using this technique, the pattern of debris one would expect to see lying on the ground after the destruction would be cleanly-cut, straight steel pieces, rather than twisted, heat deformed pretzels of steel as implied by the official "steel got soft and buckled" story. Exactly as predicted, an aerial photo of the debris field shows a thick carpet of arrow-straight, cleanly-cut lengths of steel beam, flung hither and yon.
Use of Thermite
In its famous attack on skeptics of the official 9/11 story, Popular Mechanics held that the melting agent thermite had never been used in a demolition before. Ironically it had, on the Chicago Sky Ride in 1935. It was reported in Popular Mechanics.
Thermite works by melting through steel like a hot knife through butter, illustrated in the video below.
Reaching temperatures of 5,000F, thermite can be expected to produce large pools of molten steel and iron. This is exactly what was found, to the puzzlement of rescue workers, in the basements of the Twin Towers.
Relatively slow burning thermite would have been used to weaken strong points in the structures, such as mechanical floors, prior to demolition. So it is of interest that in WTC 2, molten steel seen dripping at around floors 80 and 81 corresponded somewhat, but not exactly, to the mechanical floors at floors 75-77, below.
Another interesting use of thermite can be seen the moment just before each demolition when the perimeter columns around the impact areas seem to bow outward, giving the impression of overload. Thermite melting the core columns so that all load is transferred to the perimeter columns would give precisely this effect.
Another spectacular coincidence is the "fireproofing upgrades" which took place a year before 9/11, but only on floors of or near impact in both Towers, floors 92 - 100 in WTC1, and 77 - 78 of WTC2, which required the vacating of tenants during the work (page 42, NIST NCSTAR1-6A.)
Molten iron and steel was not observed dripping from the building until about ten minutes before destruction. This would be when firefighters were reporting that the fires were under control and almost out.
One thing which stands out about the presence of molten steel in the basements is that it stayed molten for so long, reported for weeks and even months afterwards. This would require a powerful exothermic reaction, hot enough not just to melt steel, but to raise its temperature considerably above melting point in order for heat to be stored, in the same way that water brought to near boiling cools down into the solid state of ice far more slowly than water at room temperature. With the melting point of steel at 2800F, and the thermite reaction reaching temperatures of 5,000F, the reaction would produce enough heat-energy to keep steel molten - i.e. in liquid state - for long periods of time.
Thus the evidence again fits what we would expect to find in a demolition that was a combination of thermite, and cutter and kicker charges. MORE >>>
9/11: How it Was Done, the Science of Demolition
Width of Debris Field
The billionaire elite has been very busy. They want way fewer of us, and of who remains they want absolute control so they can take the other two-thirds of the pie they don't already own. We will own nothing and we will be happy. Or else.
9/11: How it Was Done, the Science of Demolition
As public awareness grows about the truth about 9/11, it serves to point out that many features of the towers' destruction fit perfectly with standard patterns of demolition. Evidence which at first seems puzzling is in fact consistent with known demolition techniques.
WTC 7 differed from Towers One and Two in that WTC7 was a traditional "bottom-up" implosion. The Twin Towers, on the other hand, exhibited the more unfamiliar pattern of a "banana peel" demolition, which starts at the middle or the top of a building and progresses downward. The below demolition in China shows the pattern of streamers of arcing debris that we see coming from the Twin Towers, as the cutting of supports begins high above ground level and works its way down.
Banana Peel Demolition in China next to Twin Towers
Banana peel demolitions are used for taller, narrower buildings, where there is danger of the building tipping over should the bottom be cut and the rest of the sequence not execute perfectly.
But first, just how does a demolition work? Students of the truth about 9/11 will not be surprised to learn that it is essentially the art and science of causing to happen what cannot happen without careful engineering: all structural supports in a building must be cut at essentially the same time, so that all pieces are falling at free-fall acceleration through thin air. It is a difficult undertaking to remove all supports nearly simultaneously in redundantly engineered modern high-rises, with extensive cross-bracing which transfers load from compromised members to sound ones. Even then, failed demolitions are not uncommon.
In the below images we see the principle support columns in the "core" of WTC 1, an extensively cross-braced steel assembly which served as the backbone of the towers, and held 70% of the weight.
Twin Tower core backbone under construction
Illustration of main support columns
One standard technique is the use of "cutter' and "kicker" charges, in which the first set of charges, the cutters, cut the steel beam supports at precisely timed intervals, and the kicker charge "kicks" the cut piece outward. In all the film evidence of the Towers' destruction, straight, cleanly cut pieces of steel beam can be seen spinning outward from the Towers at explosive speeds, across an area at least three times as long as the Towers are wide. Thirty foot, multi-ton pieces of steel beam and perimeter assembly were found nearly three football fields away from the nearest tower, and windows were blown out across the WTC. These startling facts cannot be overstated.
Cut Steel Being Hurled Laterally at Speeds up to 80 MPH
Width of Debris Field
Width of Debris Field
Using this technique, the pattern of debris one would expect to see lying on the ground after the destruction would be cleanly-cut, straight steel pieces, rather than twisted, heat deformed pretzels of steel as implied by the official "steel got soft and buckled" story. Exactly as predicted, an aerial photo of the debris field shows a thick carpet of arrow-straight, cleanly-cut lengths of steel beam, flung hither and yon.
Use of Thermite
In its famous attack on skeptics of the official 9/11 story, Popular Mechanics held that the melting agent thermite had never been used in a demolition before. Ironically it had, on the Chicago Sky Ride in 1935. It was reported in Popular Mechanics.
Thermite works by melting through steel like a hot knife through butter, illustrated in the video below.
Reaching temperatures of 5,000F, thermite can be expected to produce large pools of molten steel and iron. This is exactly what was found, to the puzzlement of rescue workers, in the basements of the Twin Towers.
Relatively slow burning thermite would have been used to weaken strong points in the structures, such as mechanical floors, prior to demolition. So it is of interest that in WTC 2, molten steel seen dripping at around floors 80 and 81 corresponded somewhat, but not exactly, to the mechanical floors at floors 75-77, below.
WTC2 South Tower on 9/11 Molten Metal North-East Corner
Another interesting use of thermite can be seen the moment just before each demolition when the perimeter columns around the impact areas seem to bow outward, giving the impression of overload. Thermite melting the core columns so that all load is transferred to the perimeter columns would give precisely this effect.
Another spectacular coincidence is the "fireproofing upgrades" which took place a year before 9/11, but only on floors of or near impact in both Towers, floors 92 - 100 in WTC1, and 77 - 78 of WTC2, which required the vacating of tenants during the work (page 42, NIST NCSTAR1-6A.)
Molten iron and steel was not observed dripping from the building until about ten minutes before destruction. This would be when firefighters were reporting that the fires were under control and almost out.
One thing which stands out about the presence of molten steel in the basements is that it stayed molten for so long, reported for weeks and even months afterwards. This would require a powerful exothermic reaction, hot enough not just to melt steel, but to raise its temperature considerably above melting point in order for heat to be stored, in the same way that water brought to near boiling cools down into the solid state of ice far more slowly than water at room temperature. With the melting point of steel at 2800F, and the thermite reaction reaching temperatures of 5,000F, the reaction would produce enough heat-energy to keep steel molten - i.e. in liquid state - for long periods of time.
Thus the evidence again fits what we would expect to find in a demolition that was a combination of thermite, and cutter and kicker charges. MORE >>>
9/11: How it Was Done, the Science of Demolition
Width of Debris Field
Last edited:
